Part Number Hot Search : 
1N966B 1N5230 LTC17 DS31412 R1000 16005 1458127 MB156
Product Description
Full Text Search
 

To Download 1-1414939-4 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  battery disconnect switch bds-a catalog 1308028-2 revised 3-2008 all specifications subject to change. consult tyco electronics for latest specifications. 199 design elv/rohs/weee compliant dustproof; protection class ip54 to iec 529 (en 60 529) weatherproof protection weight approx. 210 g (7.41 oz.) nominal voltage 12 v or 24 v terminals quick connect terminals (coil) screw terminals (load) conditions all parametric, environmental and endurance tests are performed according to eia standard rs-407-a at standard test conditions unless otherwise noted: 23? ambient temperature, 20 - 50% rh, 998.9 ?3.9 hpa. for general storage and processing recommendations please refer to our application notes and especially to storage in the ?lossary page 23 or at http://relays.tycoelectronics.com/ appnotes/ disclaimer all technical performance data apply to the relay as such, specific conditions of the individual application are not considered. please always check the suitability of the relay for your intended purpose. we do not assume any responsibility or liability for not complying herewith. we recommend to com plete our questionnaire and to request our technical service. any responsibility for the application of the product remains with the customer only. all specifications a re subject to change without notification. all rights of tyco electronics are reserved. high current solutions high current devices features limiting continuous current 190 a at 85? electrically settable and resettable on/off bistable device suitable for voltage levels up to 42 v high peak current carrying capability up to 1500 a typical applications preheating systems (e.g. for diesel engines, catalytic converters) battery disconnection to prevent fire caused by short circuits during an accident dual battery applications provide the start reliability by a separate starter battery energy-management keeps the power net in balance and to control and secure the health of the energy storage systems seasonal, service and transport deactivation please contact tyco electronics for relay application support. 130-c_3d2 04-high current_p_185-202_2.qxd 17.03.2008 18:51 uhr seite 199
battery disconnect switch bds-a high current solutions high current devices catalog 1308028-2 revised 3-2008 all specifications subject to change. consult tyco electronics for latest specifications. 200 130c_dd_3 dimensional drawing 04-high current_p_185-202_2.qxd 17.03.2008 18:51 uhr seite 200
battery disconnect switch bds-a high current solutions high current devices catalog 1308028-2 revised 3-2008 all specifications subject to change. consult tyco electronics for latest specifications. 201 contact data for cable size 50 mm 2 contact configuration form x circuit symbol 1), 2) rated voltage 12 v 24 v rated current 190 a limiting continuous current 23? 260 a 85? 190 a 125? 88 a contact material silver based load current from terminal b to a carrying capability: 1000 a 1 s on, 9 s off, 23?, 50 mm 2 50.000 operations 3) carry starter current: 1500 a-0.2 s/600 a-5 s on, 60 s off, 23?, 50 mm 2 50.000 operations 3) voltage drop at 100 a (initial, after 1 min) < 40 mv electrical endurance: 180 a 0.1 mh 1.5 s on, 5 s off, (40/25/120)?/2 h each, 35 mm 2 13.000 operations electrical endurance: 100 a 0.1 mh 1.5 s on, 5 s off, (40/25/120)?/2 h each, 35 mm 2 50.000 operations electrical endurance: 150 a 0.1 mh 0.5 s on, 5 s off, (40/25/120)?/2 h each, 35 mm 2 25.000 operations electrical endurance: 100 a 0.1 mh 0.5 s on, 5 s off, (40/25/120)?/2 h each, 35 mm 2 70.000 operations switching capability: 1500 a 0.5 s on, 10 min off, 23?, 50 mm 2 resistive load 5 operations 3) max. temperature at load terminals 140? mechanical shock, half sine, 6 ms, 6 directions (off on) 40 g 3) 1) delivery status ?x works? 2) refer to latching relay in the ?lossary? 3) values are influenced by system temperature and load current. for further details please consult our technical application engin eers. 130c_pa_3 coil data available for nominal voltages 12 v 24 v must operate voltage at 20? (on off on) 1) 0 6 v 12 v non operate voltage at 20? 1) 0 2 v 0 4 v test voltage winding/contact, contact-contact 1) 500 vac rms ambient temperature range 40 to +120? coil excitation pulse length recommended/maximum 50 ms/100 ms switching time at 14 v on-off typ. 5 ms/off-on typ. 5 ms noise level 2) typ. 86 db (a) 1) values are influenced by system temperature and load current. for further details please consult our technical application engin eers. 2) equivalent average sound pressure level leq, switch cycled with 1 hz, microphone distance 10 cm, measuring time 15 s. circuit diagram x2c2d 1 double make contact/1 form x with 2 coils and 2 diodes 04-high current_p_185-202_2.qxd 17.03.2008 18:51 uhr seite 201
battery disconnect switch bds-a high current solutions high current devices catalog 1308028-2 revised 3-2008 all specifications subject to change. consult tyco electronics for latest specifications. 202 environmental conditions temperature range, storage refer to storage in the ?lossary catalog page 23 or http://relays.tycoelectronics.com/appnotes/ test relevant standard testing as per dimension comments vibration resistance 1) no change in the iec 68-2-6 (sine sweep) 22 - 500 hz, min. 10 g switching state > 10 s shock resistance 1) no change in the iec 68-2-27 11 ms, min. 40 g switching state > 10 s sealing en 60529 (iec 529) ip54 1) values are influenced by system temperature and load current. for further details please consult our technical application engin eers. ordering information part numbers (see table below for coil data) circuit/contact contact enclosure relay description part number arrangement material v23130-c2021-a412 1-1414939-4 1 form x/1 double make contact silver based ip54 v23130-c2421-a431 7-1414778-3 1 form x/1 double make contact silver based ip54 coil versions coil data rated coil coil resistance must must for voltage ?0% operate voltage release voltage bds-a (v) ( ) at 20? (v) at 20? (v) v23130-c2021-**** 12 4.7 6.0 (set-reset) 6.0 (set-reset) v23130-c2421-**** 24 19.9 12.0 (set-reset) 12.0 (set-reset) standard delivery packs (orders in multiples of delivery pack) bds-a: 24 pieces 04-high current_p_185-202_2.qxd 17.03.2008 18:51 uhr seite 202


▲Up To Search▲   

 
Price & Availability of 1-1414939-4

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X